4 - 203
Chapter 4 Disassembly / Assembly and Adjustments
13) Remove the three clamps on the
PLATE ASSY TOP (PL8.2.2) that fix
the harness of the HARN ASSY
INTERLOCK AIO, pull the harness
of the HARN ASSY INTERLOCK
AIO out from the hole of the CHAS-
SIS LVPS (PL8.2.13).
14) Release the clamps that fix the har-
ness of the HARN ASSY INTER-
LOCK AIO, remove the harness.
15) Remove the one screw (sliver, tap,
16mm) that fixes the HARN ASSY
INTERLOCK AIO to the printer,
remove the HARN ASSY INTER-
LOCK AIO.
To Next Page
Loading...
