4 - 204
Chapter 4 Disassembly / Assembly and Adjustments
[Replacement]
1) Mate the hole of the switch with the
boss of the printer, secure the switch
with the one screw (silver, tap,
16mm).
2) Secure the harness of the HARN
ASSY INTERLOCK AIO with the
clamps.
3) Route the HARN ASSY INTER-
LOCK AIO through the hole of the
CHASSIS LVPS , attach the three
clamps that secure the harness of
the INTERLOCK SWITCH AIO to
the PLATE ASSY TOP.
To Next Page
Loading...
