2 - 14
Chapter 2 Troubleshooting
016
758
Disabled Function
Error 016-758
Press Ok Button
<Auditron - Disabled Function>
An error occurred because a user authorized only for
B&W print attempted to execute color printing.
FIP-1.17
759
Limit Exceeded
Error 016-759
Press Ok Button
<Auditron - Reached Limit>
An attempt was made to print more copies than the print
count limit.
FIP-1.18
764
Network Scan Error
SMTP Connection
Failed
Error 016-764
Press Ok Button
<SMTP Server Connection Error>
Error occurs when connecting to
SMTP server.
FIP-1.9
765
Network Scan Error
Email Server Full
Error 016-765
Press Ok Button
<SMTP Server HD Full>
Capacity of SMTP server is not enough.
Check the
server side.
766
SMTP Server Error
Error 016-766
Press Ok Button
<SMTP Server File System Error>
Error in SMTP server.
Check the
server side.
767
Invalid Email
Address
Error 016-767
Press Ok Button
<Invalid Recipient Email Address>
Recipient email address is incorrect.
Check the
[Address
Book] Email
Address.
768
Invalid 'From'
Address
Error 016-768
Press Ok Button
<Invalid Sender Address (Login Error)>
Sender email address is incorrect.
Check the
[E-mail Alert]
Reply
Address.
770
Network Error
Invalid MPC FW
Error 016-770
Press Ok Button
<MPC Firmware Version Mismatch>
Error occurred when connecting to server during file
transfer.
Check the
network
settings and
Scan to Net
settings.
786
Network Scan Error
Communication
Timeout
Error 016-786
Press Ok Button
<Data Send/Receive Timeout Error>
Timeout error occurs in scan data send/receive.
FIP-1.9
790
Network Not Ready
Error 016-790
Press Ok Button
<F2N Module Starting-up>
F2N module task is starting up, or IP address is not
determined.
Checking the
IP address.
791
USB Memory Error
USB Memory was
removed.
Error 016-791
Press Ok Button
<USB Memory Removal Error (During Read)>
USB memory is removed while memory reading job is
being executed.
FIP-1.19
799
Invalid Job
Error 016-799
Press Ok Button
<Job Environment Violation>
Detects violation data for the print condition. The print
data specifies paper type/ size not available for the
printer.
FIP-1.20
930
USB Host Error
Unsupported Device
Error 016-930
Remove from USB
Port
<USB HOST Error>
Devices not supported have been detected.
FIP-1.21
Status
Code
Error Message
Status Contents
FIP to be
refer
red
LCD
To Next Page
Loading...
Need help?
General
