6 – 78
Chapter 6 General
- Checks the I/O Port of IIT.
Sensor name Confirmation Procedures
Home Pos Sensor
1) Turn on the power and enter the FAX Scanner Diag.
2) Open the Platen Cover.
3) Move the carriage forward by the FB Motor Diag.
4) Execute "Home Position Sensor".
5) Check the sensor "Status OFF".
6) Press "STOP" key to return one step higher menu.
7) Move the carriage reverse by the FB Motor Diag.
8) Execute "Home Position Sensor".
9) Check the sensor "Status ON".
10) Press "STOP" key to stop the test.
11) Close the Platen Cover.
Mnt02051GA
Operator Panel
Normal
Reverse Forward
Carriage Assy
To Next Page
Loading...
