6 – 115
Chapter 6 General
- Installation
Menu Contents Setting value
Serial No. Serial number of the printer. Read only
Tone Correction Specifies whether or not tone correction is performed.
On: Enable
Off: Disable
HexDup
Allows you to print the received print data in hexadecimal notation.
Used to analyze the received data in case of a printing error.
Setting Hex Dump to ON allows you to print the received data via
[Info Page] under [Print info].
On: Enable
Off: Disable
Pixel Counter Pixel count values of colors Y/M/C/K. Read only
Configuration
The use of "Configuration" is prohibited since it is a tool for design
development.
-
Print Counter
Displays the respective counter values in the master NVM and backup
NVM.
Read only
Print
Service
Full Color: Number of color print.
B/W: Number of the black and white print.
Total: Total of Full Color, Color 1, Color 2 and B/W.
Full Color Error: Number of error in color print.
B/W Error: Number of error in black and white print.
Copy
Service
Full Color: Number of color copy.
Color 2: Number of mono color or 2 color copy.
B/W: Number of the black and white copy.
Total: Total of Full Color, Color 2 and B/W.
Full Color Error: Number of error in color copy.
Color 2 Error: Number of error in mono color or 2 color
copy.
B/W Error: Number of error in black and white copy.
FAX
Service
Color: Number of color fax reception.
B/W: Number of black and white fax reception.
Total: Total of Color and B/W.
Color Error: Number of error in color fax reception.
B/W Error: Number of error in black and white fax
reception.
Scan
Servic
SMB/FTP: Number of transfer page in [Scan To SMB] and
[Scan To FTP].
Email: Number of transfer page in [Scan To Email].
SMB/FTP Error: Number of error in [Scan To SMB] and
[Scan To FTP].
Email Error: Number of error in [Scan To Email].
CopyCounter MtoB
Copies the counter value in the master NVM of the ESS PWBA to the
backup NVM of the ESS PWBA.
-
CopyCounter BtoM
Copies the counter value in the backup NVM of the ESS PWBA to
the master NVM of the ESS PWBA.
-
Clear All NVM Initializes all value of NVM. -
Clear JobHistory Initializes Job history. -
Clear AuditronPV
Initializes print volume (PV) or information of Print Auditron. When
Print Auditron is enabled, initializes information of Print Auditron.
-