H3C S3100 8C SI - Page 30

Operation Manual – CLI
H3C S3100 Series Ethernet Switches Chapter 1 CLI Configuration
1-10
View
Available
operation
Prompt
example
Enter method Quit method
Basic
ACL
view
Define rules
for a basic
ACL (with ID
ranging from
2000 to 2999)
[Sysname-acl-
basic-2000]
Execute the acl
number command in
system view.
Advance
d ACL
view
Define rules
for an
advanced
ACL (with ID
ranging from
3000 to 3999)
[Sysname-acl-
adv-3000]
Execute the acl
number command in
system view.
Layer 2
ACL
view
Define rules
for an layer 2
ACL (with ID
ranging from
4000 to 4999)
Supported by
only
S3100-EI
series
switches
[Sysname-acl-
ethernetframe
-4000]
Execute the acl
number command in
system view.
QoS
profile
view
Define QoS
profile
Supported by
only
S3100-EI
series
switches
[Sysname-qos
-profile-a123]
Execute the
qos-profile command
in system view.
RADIUS
scheme
view
Configure
RADIUS
scheme
parameters
[Sysname-radi
us-1]
Execute the radius
scheme command in
system view.
ISP
domain
view
Configure
ISP domain
parameters
[Sysname-isp-
aaa123.net]
Execute the domain
command in system
view.
HWPing
view
Configure
HWPing
parameters
[Sysname-hw
ping-a123-a12
3]
Execute the hwping
command in system
view.
HWTAC
ACS
view
Configure
HWTACACS
parameters
[Sysname-hwt
acacs-a123]
Execute the
hwtacacs scheme
command in system
view.
Execute the
quit
command to
return to
system view.
Execute the
return
command to
return to user
view.