Operation Manual – SNMP-RMON
H3C S3100 Series Ethernet Switches Chapter 1 SNMP Configuration
1-11
[Sysname] snmp-agent trap enable standard authentication
[Sysname] snmp-agent trap enable standard coldstart
[Sysname] snmp-agent trap enable standard linkup
[Sysname] snmp-agent trap enable standard linkdown
[Sysname] snmp-agent target-host trap address udp-domain 10.10.10.1 udp-port
5000 params securityname public
IV. Configuring the NMS
The S3100 series Ethernet switches support H3C’s QuidView NMS. SNMPv3 adopts
user name and password authentication. When you use H3C’s QuidView NMS, you
need to set user names and choose the security level in [Quidview Authentication
Parameter]. For each security level, you need to set authorization mode, authorization
password, encryption mode, encryption password, and so on. In addition, you need to
set timeout time and maximum retry times.
You can query and configure an Ethernet switch through the NMS. For more
information, refer to the corresponding manuals of H3C’s NMS products.
Note:
Authentication-related configuration on an NMS must be consistent with that of the
devices for the NMS to manage the devices successfully.
To Next Page
Loading...
