Operation Manual – Login
H3C S3100 Series Ethernet Switches Chapter 3 Logging in through Telnet
3-12
Scenario
Authenticati
on mode
User type Command
Command
level
The user privilege level level
command is not executed, and
the service-type command does
not specify the available
command level.
The user privilege level level
command is not executed, and
the service-type command
specifies the available command
level.
Level 0
The user privilege level level
command is executed, and the
service-type command does not
specify the available command
level.
VTY users that
are
authenticated
in the RSA
mode of SSH
The user privilege level level
command is executed, and the
service-type command specifies
the available command level.
Determined
by the user
privilege
level level
command
The user privilege level level
command is not executed, and
the service-type command does
not specify the available
command level.
Level 0
The user privilege level level
command is not executed, and
the service-type command
specifies the available command
level.
Determined
by the
service-type
command
The user privilege level level
command is executed, and the
service-type command does not
specify the available command
level.
Level 0
VTY users that
are
authenticated
in the
password
mode of SSH
The user privilege level level
command is executed, and the
service-type command specifies
the available command level.
Determined
by the
service-type
command
 Note:
Refer to AAA Operation and SSH Operation of this manual for information about AAA,
RADIUS, and SSH.