Operation Manual – VLAN-VPN
H3C S3100 Series Ethernet Switches Chapter 3
VLAN Mapping Configuration
3-7
[SwitchA-Ethernet1/0/12] vlan-mapping vlan 200 remark 600
After the above configurations, Switch A maps the VLAN tags of the customer packets
received through Ethernet 1/0/11 and Ethernet 1/0/12 to the corresponding public
network VLAN tags as defined in the VLAN mapping rules and then forwards the packet
to public network for transmission. In order that the customer packets can be
exchanged properly between the two customer networks, you need to define the same
VLAN mapping rules on Switch B on the other end of the public network. The detailed
configuration procedure is similar to that of Switch A and thus is omitted here.
To Next Page
Loading...
Need help?
General