Chapter 3 ’Web User Graphical Interface’ — GUI Description
182 Electra VS
-
Version 05.10
User Manual - Rev. A
You can also click the
Export now
button to export the logs
immediately. The name of the exported logs file follows the convention
below:
ExportLogs_yyyymmdd_hhmmss.txt
where
yyyy
is the year
mm
is the month
dd
is the day
hh
is the hour (in 24 hour format)
mm
are the minutes
ss
are the seconds
For example, the file
ExportLogs_20150406_101536.txt
was saved on
April, 6
th
of 2015 at 10:15:36.
Tip
: you can open the logs export files in Microsoft Excel.
For a correct display of the dates with Microsoft Excel: select the date
column, right-click and select "Format cell...", and then select the
category "Custom". In the field "Type", enter
yyyy/mm/dd-hh:mm:ss.000
The exported logs file contains all the same categories of information as
this displayed in the
Logs
tab, as well as additional information that is
useful for a management system equipment.
Table 3-5. Categories of information about logs
Column name in the
export file
Column name in
the GUI
Description
Severity Severity
Category Category
Type
Not available
An event is
punctual, and has a
severity from
information
to
critical
.
An alarm has a
duration, and has a
severity from
warning
to
critical
.
A status has a
duration and has a
severity of
information
.
NId Node Id Identifier of the node
JobId Job Id
To Next Page
Loading...