Chapter 3 ’Web User Graphical Interface’ — Workflow Library
Electra VS
-
Version 05.10 259
User Manual - Rev. A
RTMP Input
Description
The RTMP Input processing component lets you receive audio/video.
Only single profile is supported. Multi-bitrate is not supported.
Figure 3-229. RTM input parameters
Parameters
For this processing component, you must set the following parameters:
RTMP server IP address
: the destination IP address on which
server will accept the connection. This is a virtual IP address that will
be configured on the node that will instantiate this RTMP input.
RTMP Port
: the destination TCP port on which server will accept the
connection
(default 1935)
.
Maximum IP bitrate
: the maximum IP bitrate that will be broadcast
to the Electra VS for the session.
To Next Page
Loading...