Chapter 3 ’Web User Graphical Interface’ — Workflow Library
356 Electra VS
-
Version 05.10
User Manual - Rev. A
Smooth Streaming
Description
The
Smooth Streaming
output receives audio/video components,
creates the chunks and the manifest, encrypts the chunks, makes them
available on the local Web server and/or on a remote Web server.
Parameters
Figure 3-316. Smooth streaming parameters
For this processing component, you must set the following parameters:
Parameters Tab
Push on remote Web server
: if set to
true
, the manifest and
chunks are posted to a remote Web server, an IIS server for example.
In this case, set the following parameters:
Remote web server URL
: indicate the URL used to
communicate with the remote Web server. The syntax shall be
the following
http://remote_web_server_name/path/publishing_point.isml
or
http://remote_web_server_ip/path/publishing_point.isml
If the syntax is
http://remote_web_server_name/path/publishing_point.isml
-
you shall configure the DNS in the
Setup
tab,
IP
category
(see Chapter
Installation
)
To Next Page
Loading...