Chapter 3 ’Web User Graphical Interface’ — Workflow Library
Electra VS
-
Version 05.10 275
User Manual - Rev. A
Preprocessing
Audio processing
Description
Process uncompressed audio.
Figure 3-244. Audio processing parameters
Parameters
This workflow offers:
Use audio mixer
and
Audio mixer mode
: modifies the number
of audio channels, from 5.1, stereo or mono to
5.1
,
stereo
or
mono
.
For stereo to mono down-mixing, 3 modes are available (
Audio
mixer Stereo to Mono conversion choice
):
Mix
: mono channel is built from both channels.
Left
: the mono channel is the input left channel. This is useful for
input dual channel.
Right
: the mono channel is the input right channel. This is useful
for input dual channel.
Use audio resampler
: modifies the sampling frequency.
If you want to downmix a Dolby Digital 5.1 or Dolby Digital Plus 5.1
audio, you are recommended to use the
Audio Decoder
processing component instead.
To Next Page
Loading...