Chapter 3 ’Web User Graphical Interface’ — Workflow Library
Electra VS
-
Version 05.10 383
User Manual - Rev. A
Description of the Predefined Favorite Workflows
Favorite workflows are offered preferentially when creating a job.
The following predefined favorite workflows are provided:
Live SD-HD Encoder
Live SD-HD Transcoder
Live WebTV Transcoder
Description of the Live SD-HD Encoder Predefined Favorite
Workflow
This workflow encodes an SDI input into a TS over IP output.
Video is encoded into H.264 or HEVC.
Audio PCM is encoded into AAC, Dolby Digital or MPEG-1 Layer 2.
Dolby input is transcoded into AAC, Dolby Digital or MPEG-1 Layer 2,
or pass-through
Optional video processing is available (in this order): deinterlace,
clipping, resize, frame-rate, logo insertion, text insertion.
Optional audio processing is available (in this order): mixer,
resampler, loudness control, delay.
The output TS can be a SPTS or a MPTS.
When MPTS is chosen,
Statmux is also possible.
You shall create one job per service. These jobs shall reference
the same MPTS name.
The MPTS creation is done in its own job; this job is
automatically created, its name is the MPTS name.
A PIP (picture-in-picture; H.264 Baseline) output can also be
generated, in its own SPTS.
I period: when set to
auto
, the I period will depend on the output video
frame rate: 24 at 25 fps, 32 at 29.97 fps, 48 at 50 fps, 64 at 59.94 fps.
Description of the Live SD-HD Transcoder Predefined Favorite
Workflow
This workflow transcodes a TS over IP input into a TS over IP output.
Video is transcoded into H.264, HEVC or MPEG-2.
You can add your own workflows in the
Favorite
category.
To Next Page
Loading...