Chapter 3 ’Web User Graphical Interface’ — Workflow Library
384 Electra VS
-
Version 05.10
User Manual - Rev. A
Audio is transcoded into AAC, Dolby Digital or MPEG-1 Layer 2, or
pass-through.
Pass-through components are possible.
Optional video processing (in this order): deinterlace, clipping, resize,
frame-rate, logo insertion, text insertion.
Optional audio processing (in this order): mixer, resampler, loudness
control, delay, mute.
The output TS can be a SPTS or a MPTS.
When MPTS is chosen:
Statmux is also possible.
You shall create one job per service. These jobs shall reference the
same MPTS name.
The MPTS creation is done in its own job; this job is automatically
created, its name is the MPTS name.
A PIP (picture-in-picture; H.264 Baseline) output can also be
generated, in its own SPTS.
I period
: when set to
auto
, the I period will depend on the output video
frame rate: 24 at 25 fps, 32 at 29.97 fps, 48 at 50 fps, 64 at 59.94 fps.
The parameters of a job based on the Live SD-HD Transcoder workflow
are shown in section
’Setting Job Parameters Based on the Predefined
Workflows’
on page 96.
To Next Page
Loading...