Chapter 3 ’Web User Graphical Interface’ — Workflow Library
352 Electra VS
-
Version 05.10
User Manual - Rev. A
#EXT-SCTE-35:CUE="/DAIAAAAAAAAAAAQAAZ/I0VniQAQAgBDVUVJQ
AAAAH+cAAAAAA=="
Figure 3-314. HLS output – Section parameters
HLS File Output
The
HLS File
output receives audio/video components, creates the
chunks and manifests, encrypts the chunks and makes them available on
a network storage.
Parameters Tab
Figure 3-315. HLS file output parameters
For this processing component, you must set the following parameters:
If you want the chunk to insert a segment when receiving a SCTE 35
splice in or splice out, you must also activate the option "SCTE 35
conditioning» in the chunker.
To Next Page
Loading...