EasyManua.ls Logo

Harmonic ELECTRA VS - Input Specifications

Harmonic ELECTRA VS
604 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Appendix A ’Technical Specifications’ — Common Specifications
Electra VS
-
Version 05.10 513
User Manual - Rev. A
Common Specifications
Input Specifications
Live TS Over IP Inputs
MPEG-2 TS MPTS/SPTS over IP (CBR & VBR)
Bitrate range: 10 kbit/s - 100 Mbps
Supported protocols: TS/UDP/IP or TS/RTP/UDP/IP
Packet sizes: 188/204
Unicast and multicast, IGMP v2, IGMP v3, SSM
IPV4 support
Live RTMP Inputs
Bitrate range : 10kbps - 50 Mbps
Protocols: RTMP protocol 1.0
RTMPS, RTMPE, RTMPT or RTMPTE protocols are not supported
Supported video formats: H264
Supported audio formats: AAC-LC, AAC-HE v1, AAC-HE v2
RTMP Streams are identified per stream name, only one stream per
connection is supported.
Multi-bitrate is not supported.
SDI Inputs (Depending on Server Type)
Standards:
SMPTE 259M (SD-SDI)
(see
’SMPTE 259M-2008’
)
SMPTE 272M (Embedded audio in SD)
(see
’SMPTE 272M-2004’
)
SMPTE 292M (HD-SDI) for dual and quad cards
(see
’SMPTE ST 292-1:2011’
)
SMPTE 299M (Embedded audio in HD)
(see
’SMPTE 299M-2004’
)
SMPTE 424M (3G-SDI)
Level A, Level B Dual Link (B-DL). Level B Dual Stream (B-DS) is
not supported.
(see
’SMPTE ST 424:2012’
)

Table of Contents