Harmonic ELECTRA VS - Configuring the Interface of the First Node (Master Node)

Chapter 2 ’Installation and Startup’ — Virtualization Delivery
Electra VS - Version 05.10 75
User Manual - Rev. A
8. Add one by one the following line in the configuration parameters
pushing add line.
monitor_control.halt_desched = false
numa.autosize.once = false
numa.autosize = true
sched.cpu.latencySensitivity = high
Configuring the Interface of the First Node (Master Node)
Configure the first interface of the master node to be in the System
Private LAN and set the IP address for the Management LAN.
1. Open a console on the Node.
1. Connect in Guest mode (User = THVNguest Pwd = THVNpwd0). 
Note that by default us keyboard is loaded.
2. Execute the following commands:
loadkeys [fr|us] : load the keyboard translation table if required.