Harmonic ELECTRA VS - TS Video Extractor

Chapter 3 ’Web User Graphical Interface’ — Workflow Library
Electra VS - Version 05.10 243
User Manual - Rev. A
TS Video Extractor
Description
This workflow extracts a video stream from a TS.
The output video elementary stream can be forwarded to a video
decoder, for example.
Figure 3-221. TS video extractor parameters
Parameters
 Program number : program number (also known as Service ID in
DVB standard) of the program (or service) that contains the requested
video stream. You can also use one of the predefined values:
 First one: the first program referenced by the PAT table is
considered. This value is suitable when the input TS is a single
program TS (SPTS).
 All : all the programs referenced by the PAT table are processed.
 PMT PID : PMT PID of the program that contains the requested video
stream. When set to
Auto , the value will be automatically discovered
by the device. This parameter is useful when you want to use the same
PMT PID for the output program: you can set a label to this parameter,
and link the output PMT PID parameter to this parameter.
 Video PID : PID of the requested video component. You can also use
one of the predefined values:
 First one : the first video component that matches the global
criteria is processed.
 All : all the video components that matches the global criteria are
processed. Can be useful when you want to process the video of
all the programs of a MPTS, for example.