Harmonic ELECTRA VS - Get the Active Log List or Closed Log List

Appendix B ’SNMP Management’ — MIB Description
556 Electra VS - Version 05.10
User Manual - Rev. A
Get the Active Log List or Closed Log List
Figure B-3. MIB log list and closed log list
To retrieve the active log list or the closed log list, walk either the
supActiveLogTable or the supClosedLogTable . For example:
 To retrieve the active log list:
WALK supActiveLogTable
 To retrieve the closed log list:
WALK supClosedLogTable
Each time a change occurs in one of these two lists, the supLogVersion
variable is updated. To find out if there has been a change in one list: 
GET supLogVersion.0
If the result value is not the same as the previous one, a change has
occurred.