Harmonic ELECTRA VS - Method #2: Connecting on the DHCP Network Using the IP Address of the Device

Chapter 7 ’Tools’ — HP Monitoring Tools (6RU and 10RU Devices)
474 Electra VS - Version 05.10
User Manual - Rev. A
3. Enter the user name and password indicated on the asset tag.
You are now connected to the HP configuration interface.
Figure 7-6. HP configuration interface – welcome page
Method #2: Connecting on the DHCP Network
using the IP Address of the Device
If you have a DHCP server but you do not have a DNS server, you can
retrieve the IP address of the blade center from the front panel and use it
to connect to the equipment via the DHCP network.
To do so:
1. On the front panel of the Electra VS device, press OK to activate the
display.
Figure 7-7. Electra VS front panel screen – Main menu