Harmonic ELECTRA VS - Register;Unregister a Manager to Receive Traps

Appendix B ’SNMP Management’ — MIB Description
Electra VS - Version 05.10 555
User Manual - Rev. A
Register/Unregister a Manager to Receive Traps
Figure B-2. MIB trap addressee table
To register or unregister a trap receiver, add or remove the
agtStgTrDstTable table lines. For example:
 To add an snmpV2 trap receiver with the 178.3.2.10 IP address:
SET agtStgTrDstEvalRowStatus.178.3.2.10 integer 4 (Create and
go)
SET agtStgTrDstSnmpVersion.178.3.2.10 integer 2 (snmp v2)
 To add a snmpV1 trap receiver with the 178.3.2.20 IP address:
SET agtStgTrDstEvalRowStatus.178.3.2.20 integer 4 (Create and
go)
SET agtStgTrDstSnmpVersion.178.3.2.20 integer 1 (snmp v1)
 To remove a trap receiver with the 178.3.2.10 IP address:
SET agtStgTrDstEvalRowStatus.178.3.2.10 integer 6 (Remove)