Chapter 3 ’Web User Graphical Interface’ — Workflow Library
242 Electra VS
-
Version 05.10
User Manual - Rev. A
Parameters
For this processing component, you must set the following parameters:
TS file storage
: location on the server where the TS file to import in
input is stored. Several methods allows to define the location. Refer to
section
’Video overlay’
on page 296 for the possible syntaxes.
TS file folder
: folder on the network storage where the TS file to
import in input is stored.
TS file name
: name of the TS file to import in input.
Iterations
: number of consecutive times the file will be played.
Monitoring view
: set to
True
if you want to create a snapshot view
for this input. In this case, indicate the
Standard
that the TS file to
import respects (DVB, MPEG-2 or ATSC), so that suitable information
will be displayed. For more information on snapshot views, refer to
section
’Using the Snapshot View’
on page 114.
Standard
: select the standard between
MPEG-2
,
DVB
,
ATSC
.
The TS bitrate is automatically computed from the file PCRs.
Loops are not seamless: there are continuity counter errors, and
audio/video disruption.
To Next Page
Loading...