Chapter 3 ’Web User Graphical Interface’ — Workflow Library
Electra VS
-
Version 05.10 251
User Manual - Rev. A
Clock management
: if set to
Convert to device internal clock
(default value), then the input clock is converted to the device clock. If
set to
Keep input clock
, then the input clock is kept. When you want to
multiplex components from different input programs, the clocks shall
be converted to the device clock. When you want to output a
pass-through component that is scrambled, or that contains private
sections that contain some clock values, you shall keep the input clock.
Generate fake component on absence
: set it to true if you want
to create of fake component on absence of input component.
When no component is detected at the extractor input then a fake
component is declared in the PMT with the configured information:
Fake Program Number
Fake PMT PID
Fake Component PID
Fake Language
Fake Stream Type
When a real component is detected then the fake component is
removed.
Even if
Program number
or
Video PID
are configured to
All
only
one fake component is created in the output PMT.
This mechanism can be used to generate a Dash MPD if there is no
stream at the input of the job.
To Next Page
Loading...