Harmonic ELECTRA VS - Page 290

Chapter 3 ’Web User Graphical Interface’ — Workflow Library
290 Electra VS - Version 05.10
User Manual - Rev. A
 Deinterlace : deinterlace the video
 Modify frame rate : if set to False , the input frame rate is kept
in output. If set to
True ,
- define the Frame rate in frames per second.
- define the Web TV: adaptation to external packager .
Set it to
true if all the following conditions are met:
• A channel contains adaptive bitrate streams with
different frame rates.
• An external packager is used. The internal design of the
external packager requires that the IDR frame of all the
chunks of a given period has the same PTS. In this case,
an adaptation may be necessary.
If the external packager does not have this limitation, do not
use this parameter as it may reduce the video quality.
This parameter is ignored when there is no chunker before
the frame rate adaptation.
Figure 3-260. Video format converter parameters - Deinterlace
 Interlace : there is no parameter.
Figure 3-261. Video format converter parameters - Interlace