Chapter 3 ’Web User Graphical Interface’ — Workflow Library
308 Electra VS
-
Version 05.10
User Manual - Rev. A
Start/Stop effect
: Several effects are pre-defined:
Fade,
Wipe, Split, Fly in, Fly out, Animation control
(for image overlay
only, using the sequence picture from the image file).
If set to
None
, the overlay appear/disappear at/from the
indicated position without pre-defined effect.
Start/stop effect: duration
(displayed if the effect is not
Animation control
): duration in second of the effect.
Start/Stop effect: from:
Wipe
or
Fly in/Fly out
source (
Left,
Right, Top, Bottom
).
Start/Stop effect: split mode
(displayed if configured effect
is
Split
): indicate if the horizontal or vertical split is performed
from the side of the overlay (in) or from the center (out).
Start/Stop effect: move offset
(displayed if configured
effect is
Fly in/ Fly out
): if set to 0 pixel, the overlay appears
at/disappears from its configured position, otherwise it
appears/disappears from a position shifted of the indicated
offset towards the source effect.
Start/Stop effect: from picture
(displayed if configured
effect is
Animation control
): first picture of the animated
sequence in the image file.
Start/Stop effect: to picture
(displayed if configured effect
is
Animation control
): first picture of the animated sequence in
the image file.
To Next Page
Loading...