Chapter 3 ’Web User Graphical Interface’ — Workflow Library
Electra VS
-
Version 05.10 333
User Manual - Rev. A
UDP source port
: to set the source UDP port.
Leave to same as destination UDP port to keep the same port for both
source and destination.
TTL
: Time-to-live field of the IP headers. This is the maximum number
of IP routers that a stream is allowed to cross.
MTU
: Maximum Transmission Unit. This is the maximum size of a
datagram that can be streamed on the network without being
fragmented. Default value is Ethernet one (1500). This MTU also
defines the number of MPEG-2 TS packets by IP datagram. By default
this number is set to 7, but if you modify the MTU parameter, the
number of MPEG-2 TS packets by IP datagram will be the highest
allowed by the MTU.
Protocol
: the protocol can be:
TS/UDP/IP
: MPEG-2 TS over UDP.
TS/RTP/UDP/IP
: MPEG-2 TS over RTP.
VBR TS (no stuffing packets)
: set to
true
if you do not want
stuffing packets to be added in the output stream.
To Next Page
Loading...