© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com
5.35. If key
Pressing the If key gives you the IfOutput command.
This can be used to select fixtures.
Depending on what you press after the If key you'll get a selection of different fixtures.
You can select fixtures based on what's currently on, currently using a preset, or is on and part of a specific
group.
To learn more about the different options, please follow the link above.
Advanced functionality
Pressing the together with the If key, will give you the If command.
This allows you to limit selections of fixtures or as a limitation in various operations. Please follow the link above
the learn more about the If command.
To Next Page
Loading...
