Minimize: Located in the executor bar window title bar.
Tap to minimize the executor bar window to the executor bar.
If you see this icon, you can also close the view by swiping from the top of the screen to the bottom.
Jump Back: Located in the select fixture ID(s) view title bar.
Tap to jump backwards to the next available fixture ID.
Jump Forwards: Located in the select fixture ID(s) view title bar.
Tap to jump forwards to the next available fixture ID..
Effect Loop: Located in the preset type views title bar.
Tap to open the corresponding effect view.
Information Sign: Located in the Setup.
Tap to open the System Information Window.
Backup Icon: Located in the Load Show Window.
Tap to see the .backup files.
Esc: Located on the left side of a title bar.
Tap to leave the current view.
OK: Located on the right side of a title bar.
Tap to confirm your changes.
Frame: Located on the right side of the Wing & Nodes Diagnosis Window.
Tap to identify the selected device in the network.
Effect Mode Title Bar
If an effect is running on the selected fixtures and the preset type of the running effect is selected in the preset
type bar, the preset type view changes into an effect mode and gets a purple title bar.
To Next Page
Loading...
