© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com
3
Dimmer open (tracked
value)
Dimmer 50 % (entered
value)
Dimmer 50 % (because
this is a tracked value
and clone method
merge will not add
tracked values)
Cue
Fixture 1
(before merge)
Fixture 2
(before merge)
Fixture 2
(after merge)
Example Overwrite
Fixture 1 stored on executor 2 - cue 1, has a defined color red and a gobo.
Fixture 2 stored on executor 3 - cue 1, has a defined position pan and tilt.
Figure 4: Fixture 1 and 2 before clone
Let´s assume, you will clone fixture 1 at 2 and fixture 2 should make exactly the same like fixture 1.
1. Press + Copy (= Clone) Fixture 1 At 2 Please .
The console will ask you to choose the clone method.
2. Tap Overwrite .
Figure 5: Fixture 1 and 2 after clone
Fixture 2 has now the exactly the same values as fixture 1. All previous defined values are deleted.
Fixture 1 and 2 are on executor 2. Fixture 2 does not exist anymore on executor 3.
Related Links
Clone Command
Copy Key
To Next Page
Loading...
