© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com
Hint:
Double-check the programmer values in the fixtures sheet view.
Hint:
Clear programmer is the same function as press the Clear Key twice.
Encoder Bar Functions
Figure 2: Encoder Bar Off... Window
Select:
To select one of the three off buttons, turn the encoder left or right. The selected is displayed in a brighter gray.
To apply a function, press the encoder.
To Next Page
Loading...
