© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com
Figure 5: Select Function of Executor – Group Master
Select: Selects all fixtures used on this group master.
Flash (Only for executors with faders): Sets the group master to 100 %, as long as you press and hold the
executor button.
Black: Sets the group master to 0 %, as long as you press and hold the executor button.
100mm Fader
There are twelve different functions there.
Important:
If the Master of the main executor is replaced by another function, for example Speed Master, the main
executor is automatically set to 100 %. This means that all fixtures will automatically go on on stage.
To Next Page
Loading...
