© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com
Figure 6: Select Function of 100mm Fader
Master: Scales the output of dimmer values from main executor.
Crossfade: Crossfades between two cues within the main executor.
CrossfadeA: Crossfades decreasing dimmer values from the main executor.
CrossfadeB: Crossfades increasing dimmer values from the main executor.
TempFader: Crossfades the cue on when pulled up, and off when pulled down on the main executor.
Master Rate: Controls the rate of the trig time, fade and delay from all executors which use the master rate.
Master Speeds 1-4: Control the speed of effects in cues and the playback speed of chasers from all executors
which use a master speed.
Prog Time: Controls the fade time of the programmer only if it is switched on.
Exec Time: Overrides the cue fade and on /off times and it also sets the cue delay to zero from all executors if it is
switched on.
Empty: The fader has no function.
For more information see Magic Speed.
To Next Page
Loading...
