© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com
Group/Grand Master:
A group or the grand master is less than 100%. Refer to Empty Executor window and Getting Started Guide - 2
Physical Setup and Layout.
Highlight:
The highlight mode is on. Refer to, Highlt (Highlight) Key.
Solo:
The Solo is on. For more information see the Solo Command.
Missed Stations:
A previous available station is missing. Double-check the connected devices in the Network Setup.
IP Conflict:
Two consoles with the same IPv4 address are available. Change the IP address.
Speed 1:
Master speed is on. To turn the master speed off, refer to Magic Speed window.
Rate 1:
Master rate is on. To turn the master rate off, refer to Magic Speed window.
Exec Time:
Executor time is used. To turn the exec time to 0.0 s, refer to Magic Speed window.
Prog. Time:
Programmer Time is used. To turn the programmer time to 0.0 s, refer to Magic Speed window.
To Next Page
Loading...
