© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com
Something is not patched:
There are fixtures in the Patch and Fixture Schedule without a patch address. Double-check the fixtures in the
Patch and Fixture Schedule.
Unassigned Ports:
Fixtures in the Patch and Fixture Schedule are assigned to an universe what is not available, e.g. universe 5 on a
single dot2 core.
Not enough Parameters:
The dot2 onPC is missing a connected device to have DMX output.
A connected dot2 console or a connected Node4 is necessary for the dot2 onPC, to have a DMX output.
More than 1024 DMX channels are patched on a dot2 onPC.
Parked:
DMX channels are parked. Parked channels has a blue background in the DMX view.
To unpark all DMX channels, open the tools window.
Preview:
Preview is on. Refer to, Prvw (Preview) Key and Preview Command.
Blind:
Blind is on. Refer to, Blind Key and Blind Command.
Global Autofix:
Global autofix is off. To turn global autofix on, refer to Global Settings.
Web Remote:
Console is connected to a device via the web remote. For more information on web remote see Global Settings.
To Next Page
Loading...
