O
Out Delay:
Wait time for dimmer values going to a lower intensity level.
P
Pan:
Horizontal movement axis of an fixture. Refer, to Position Preset View.
Presets:
There are nine preset types to control from the console. Refer to, Preset Pool View and Preset Type Bar.
Priority:
Some values have a higher priority than others. In other words, they will not be overwritten by those with a lower
priority. The programmer, for instance, has a higher priority than an executor.
Programmer:
Is a container with the current selection of fixtures and values of manual adjusted attributes. Those values are
red values. Refer to, Value colors.
Program Time Master:
The program time master controls the fade times of all program values and effects, between 0 and 10 seconds.
This affects both, the adding of new values into the programmer, and the removing of values from the
programmer with the Clear key.
The program time master is a fade executor. Refer to, Empty Executor Window.
R
Rpm (revolution per minute):
Rotationspeed of a gobowheel in the unit revolution per minute, refer to Gobo Preset Type View.
S
Shutter:
Fast open and close of the light output of a fixture type.
SMPTE (society of motion picture and television engineers):
Is a timecode to synchronize different devices from different manufacturers in the audio and video technology.
Refer to, Select Trig View.
To Next Page
Loading...
