System SP1-xxx
D086/D087 3-26 SM Appendix
1131 [Continues Print Mode Switch]
001
Feed Permit Condition *ENG
[0 to 2 / 0 / 1 /step]
0: Productivity priority
1: Fusing quality priority 1
2: Fusing quality priority 2
Selects the paper feed permission type.
1132 [Maximum Duty Switch]
001 Control Method Switch *ENG
[0 to 2 / 0 / 1 /step]
0: Fixed Duty, 1: Power Control
1141 [Fusing SC Issue Time Info]
001 SC Number *ENG Displays the issued SC number.
002 SC Cause *ENG
[0 to 9 / - / 1/step]
101 Htg Roller:Ctr Diff1 *ENG
[0 to 260 / - / 1 deg/step]
Displays the temperature at the
center of the heating roller when an
SC was issued.
102 Htg Rolloer:Ctr Det1 *ENG
103 Htg Roller:Ctr Corr1 *ENG
104 Htg Roller:End Diff1 *ENG
[0 to 260 / - / 1 deg/step]
Displays the temperature at the
end of the heating roller when an
SC was issued.
105 Htg Roller:End Det1 *ENG
106 Htg Roller:End Corr1 *ENG
107 Press Roller Temp Value1 *ENG
[0 to 260 / - / 1 deg/step]
Displays the temperature at the
pressure roller when an SC was
issued.
To Next Page
Loading...
