Controller Options
SM 2-103 D086/D087
Installation
2.26 CONTROLLER OPTIONS
2.26.1 OVERVIEW
This machine has I/F card slots for optional I/F connections and SD card slots applications.
After you install an option, check that the machine can recognize it (see "Check All
Connections" at the end of this section).
I/F Card Slots
Slot A is used for one of the optional I/F connections (only one can be installed):
IEEE1284, IEEE802.11a/g (Wireless LAN), Bluetooth or Remote Communication Gate.
Slot B is used for the File Format Converter or Remote Communication Gate.
Slot C is used for Gigabit Ethernet.
SD Card Slots
Slot 1 is already occupied by the Security SD Card by factory default, and is also used for
optional applications (e.g.: PostScript 3, PictBridge, IPDS unit, PDF direct, etc).
Slot 2 is used for installing the Browser Unit, VM card or for service only (for example,
updating the firmware).
To Next Page
Loading...
