Paper Feed Unit PB3080 (D387)
SM 2-23 D086/D087
Installation
2.4.2 INSTALLATION PROCEDURE
Turn off the main switch of the copier and unplug the power cord before you start the
installation procedure.
You need two or more persons to lift the copier. The copier is highly unstable when
lifted by one person, and may cause human injury or property damage.
Do not lift the copier with the paper feed unit installed. The handle and grips may be
damaged.
The one-tray paper feed unit must be installed on the caster table (D446). Prepare
the caster table first before installing this unit.
The Envelope Feeder EF3000 (D547) cannot be used in this unit. Do not install the
Envelope Feeder EF3000 (D547) in this unit.
1. Remove all tape on the paper feed unit.
2. Remove the paper tray and remove all tapes and padding.
To Next Page
Loading...
