Anti-Condensation Heater Type A
D086/D087 2-94 SM
2.25.2 INSTALLATION PROCEDURE
Unplug the machine power cord before starting the following procedure.
Do the following procedure not to damage any harnesses.
Check that all harnesses are not damaged nor pinched after installation.
For installing the tray heater in the main machine
1. Remove trays 1 and 2 from the machine.
2. Remove the connector cover [A] (
x 1).
3. Connect the connector [B] of the heater to the connector of the main machine.
4. Install the heater [C] inside the machine (
x 1).
5. Reassemble the machine.
To Next Page
Loading...
