Service Program Mode
D086/D087 5-6 SM
5.1.4 REMARKS
Display on the Control Panel Screen
The maximum number of characters which can show on the control panel screen is limited to
30 characters. For this reason, some of the SP modes shown on the screen need to be
abbreviated. The following are abbreviations used for the SP modes for which the full
description is over 20 characters.
Paper Weight
Thin paper: 52-59 g/m
2
Plain Paper: 60-90 g/m
2
, 16-24lb.
Middle Thick: 91-105 g/m
2
, 24-28lb.
Thick Paper 1: 106-169 g/m
2
, 28.5-44.9lb.
Thick Paper 2: 170-220 g/m
2
, 45-58lb.
Thick Paper 3: 221-256 g/m
2,
59lb-68lb
Thick 4: 257 g/m
2
-300 g/m
2
, 68.4-79.8lb
Paper Type
N: Normal paper
MTH: Middle thick paper
TH: Thick paper
Paper Feed Station
P: Paper tray
B: By-pass table
Color Mode [Color]
[K]: Black in B&W mode
[Y], [M], or [C]: Yellow, Magenta, or Cyan in Full Color mode
[YMC]: Only for Yellow, Magenta, and Cyan
[FC]: Full Color mode
[FC, K], [FC, Y], [FC, M], or [FC, C]: Black, Yellow, Magenta, or Cyan in full color mode
Print Mode
S: Simplex
D: Duplex
Process Speed
L: Low speed (77 mm/s)
M: Middle speed (154 mm/s)
To Next Page
Loading...
