Envelope Feeder EF3000 (D547)
SM 2-31 D086/D087
Installation
2.7.2 INSTALLATION PROCEDURE
This tray can be installed in tray 2 of the copier, or tray 3 or tray 4 of the paper feed
unit (D537).
There is no automatic paper size detection in the envelope feeder (D547). Adjust the
paper size for the tray where the envelope feeder is to be installed with User Tools.
1. Remove all tape from the envelope feeder.
2. Pull out tray 2 [A] from the main machine.
3. Install the envelope feeder [A] into tray 2 of the main machine.
4. Press the "User/Tools" key on the operation panel.
5. Enter "Small Paper Size Tray" under "General Features".
Initial Settings > General Features > Small Paper Size Tray
6. Select "On" for the tray where the envelope feeder is installed.
7. Turn the main machine off and on.
To Next Page
Loading...
