LCIT PB3110 (D538)
SM 2-37 D086/D087
Installation
2.9.2 INSTALLATION PROCEDURE
Turn off the main switch of the copier and unplug the power cord before you start the
installation procedure.
You need two or more persons to lift the copier. The copier is highly unstable when
lifted by one person, and may cause injury or property damage.
Do not lift the copier with the paper feed unit installed. The handle and grips may be
damaged.
1. Remove all tapes and retainers in the LCT.
2. Grasp the handle [A] and grips [B] of the machine.
3. Lift the copier and install it on the LCT [C].
Hold the handle [A] and grips [B] of the machine when you lift and move the
machine.
To Next Page
Loading...
