Punch Kit PU3000 (B807)
SM 2-75 D086/D087
Installation
2.19.2 INSTALLATION
Unplug the main machine power cord before starting the following procedure. If the
1000-sheet booklet finisher has been installed, disconnect it and pull it away from the
machine.
1. If the finisher is connected to the machine, disconnect it.
2. Open the top cover [A] and then release the guide arm [B] (
x 1).
3. Open the front door [C].
4. Pull the hook [D] up then remove the knob [E].
To Next Page
Loading...
