Paper Feed Unit PB3010 (D537)
D086/D087 2-28 SM
2.6.2 INSTALLATION PROCEDURE
Turn off the main switch of the copier and unplug the power cord before you start the
installation procedure.
You need two or more persons to lift the copier. The copier is highly unstable when
lifted by one person, and may cause injury or property damage.
Do not lift the copier with the paper feed unit installed. The handle and grips may be
damaged.
1. Remove all tape on the paper feed unit.
2. Remove the paper trays and remove all tape and padding.
3. Grasp the handle [A] and grips [B] of the machine.
4. Lift the copier and install it on the paper feed unit [C].
To Next Page
Loading...
