Copier Installation
D086/D087 2-14 SM
Settings Relevant to the Service Contract
Change the necessary settings for the following SP modes if the customer has made a
service contract.
You must select one of the counter methods (developments/prints) in accordance
with the contract ( SP5-045-001).
The SP operation sound can be turned on or off. For details, see "SP Operation
Sound On/Off Setting" below.
Item SP No. Function Default
Counting
method
SP5-045-001
Specifies if the counting method
used in meter charge mode is
based on developments or prints.
“0”:
Developments
A3/11" x 17"
double
counting
SP5-104-001
Specifies whether the counter is
doubled for A3/11" x 17" paper.
When you have to change this
setting, contact your supervisor.
“No”: Single
counting
Service Tel.
No. Setting
SP5-812-001
through 004
5812-002 programs the service
station fax number. The number is
printed on the counter list when the
meter charge mode is selected.
This lets the user fax the counter
data to the service station.
To Next Page
Loading...
