Installation Requirements
SM 2-1 D086/D087
Installation
2. INSTALLATION
2.1 INSTALLATION REQUIREMENTS
2.1.1 ENVIRONMENT
1. Temperature Range: 10°C to 32°C (50°F to 89.6°F)
2. Humidity Range: 15% to 80% RH
3. Ambient Illumination: Less than 1500 lux (do not expose to direct sunlight)
4. Ventilation: 3 times/hr/person or more
5. Do not let the machine get exposed to the following:
1) Cool air from an air conditioner
2) Heat from a heater
6. Do not install the machine in areas that are exposed to corrosive gas.
7. Install the machine at locations lower than 2,000 m (6,560 ft.) above sea level.
8. Install the machine on a strong, level base. (Inclination on any side must be no more than
5 mm.)
9. Do not install the machine in areas that get strong vibrations.
Do not leave the toner bottle in a place directly exposed to sunlight.
The toner bottle must be kept at a temperature of 35°C (95°F) or less. Be careful not
to leave the toner bottle in a hot place when transporting or storing it.
To Next Page
Loading...
