System SP1-xxx
D086/D087 3-28 SM Appendix
1151 [Pressure Setting]
001
Pressure Change ON/OFF *ENG
[0 or 1 / 1 / -]
Enables or disables the pressure switching control for the fusing unit.
0: OFF , 1: ON
002
Pressure Position1 *ENG
[0 to 10,000 / 420 / 10 msec/step]
Specifies the rotation time of the pressure roller contact motor for the pressure
position 1.
003
Pressure Position2 *ENG
[0 to 10,000 / 660 / 10 msec/step]
Specifies the rotation time of the pressure roller contact motor for the pressure
position 2.
004
Pressure Position3 *ENG
[0 to 10,000 / 2130 / 10 msec/step]
Specifies the rotation time of the pressure roller contact motor for the pressure
position 3.
005
Depressure Position *ENG
[0 to 10,000 / 220 / 10 msec/step]
Specifies the rotation time of the pressure roller contact motor for the
depression position (no pressure).
010
Shift Time *ENG
[0 to 3600 / 5 / 1 sec/step]
Specifies the timing for depressing the fusing unit. If the machine does not get
any jobs for specified time by this SP after copying or printing, the machine
depresses the fusing unit.
101 Pressure:Plain1/2 *ENG
[0 to 3 / 3 / 1 /step]
Sets the default pressure position of the fusing unit for each paper type in
normal speed.
0: Depression position (no pressure)
1: Position 1 (less pressure)
2: Position 2
3: Position 3 (strongest pressure)