System SP2-xxx
SM Appendix 3-47 D086/D087
Appendix:
SP Mode
Tables
012 AH Threshold S *ENG
[0 to 20 / 1 / 0.1 g/m
3
/step]
013 Non-use Time *ENG
[0 to 1440 / 360 / 10 min/step]
2015 [Charge AC Control:Result]
001 Bk *ENG
[0 to 9 / 0 / 1 /step]
0: Success
1: Out of tolerance range
2: Out of adjustable range
3: Adjustment incompleted
002 M *ENG
003 C *ENG
004 Y *ENG
2101
[Color Registration Correction] FA
These values are the parameters for the automatic line position adjustment and
are adjusted at the factory. However, you must input a value for SP2101-001
after replacing the laser optics housing unit. For details, see "Laser Optics
Housing Unit" in the "Replacement and Adjustment" section. The value should
be provided with the new laser optics housing unit.
001 Main Dot: Bk *ENG
[–512 to 511 / 0 / 1 dot/step]
002 Main Dot: Ma *ENG
003 Main Dot: Cy *ENG
004 Main Dot: Ye *ENG
005 Sub Line: Bk *ENG
[–16384 to 16383 / 0 / 1 line/step]
006 Sub Line: Ma *ENG
007 Sub Line: Cy *ENG
008 Sub Line: Ye *ENG
2102
[Magnification Adjustment] DFU
001 Main Mag.: High Speed: Bk *ENG
These are results of the main
scan length adjustment.
002 Main Mag.: Medium Speed: Bk *ENG
To Next Page
Loading...
