System SP2-xxx
SM Appendix 3-49 D086/D087
Appendix:
SP Mode
Tables
010 Duplex Right Edge *ENG
011 Duplex Trail. L Size:Thick *ENG
[0 to 4 / 1 / 0.1 mm/step]
012 Duplex Trail. M Size:Thick *ENG
[0 to 4 / 0.8 / 0.1 mm/step]
013 Duplex Trail. S Size:Thick *ENG
[0 to 4 / 0.6 / 0.1 mm/step]
014 Duplex Left Edge:Thick *ENG
[0 to 1.5 / 0.3 / 0.1 mm/step]
015 Duplex Right Edge:Thick *ENG
2105 [LD Power Adj.] (Process Speed, Color)
Adjusts the LD power of each color for each process speed.
Each LD power setting is decided by process control.
001 High Speed: Bk *ENG
[50 to 120 / 100 / 1%/step]
Decreasing a value makes lines thinner
on the output.
Increasing a value makes lines thicker
on the output.
002 High Speed: Ma *ENG
003 High Speed: Cy *ENG
004 High Speed: Ye *ENG
005 Middle Speed: Bk *ENG
[50 to 120 / 100 / 1%/step]
Decreasing a value makes lines thinner
on the output.
Increasing a value makes lines thicker
on the output.
006 Middle Speed: Ma *ENG
007 Middle Speed: Cy *ENG
008 Middle Speed: Ye *ENG
009 Low Speed: Bk *ENG
[50 to 120 / 100 / 1%/step]
Decreasing a value makes lines thinner
on the output.
Increasing a value makes lines thicker
on the output.
010 Low Speed: Ma *ENG
011 Low Speed: Cy *ENG
012 Low Speed: Ye *ENG